Fence Repair in Columbus, Ohio

Transit & Flow Group repairs existing fences across Columbus and Central Ohio: leaning posts, broken or missing pickets, panels knocked loose by wind or a fallen branch, and rails pulling away from posts. This page covers fixing a fence that is already in the ground and no longer doing its job, not building a new one. Tell us what the fence is doing wrong and where, with photos, in the Estimate Builder for a preliminary online estimate.

Is this the right service for you?

Fence Repair covers the fence itself: a post that has heaved or rotted at the base, a panel section that has come off its rails, pickets that are split or missing, and sagging caused by hardware or posts that have failed over time. We work on wood, vinyl, chain link, and aluminum fencing.

If the piece that is broken is the gate rather than the fence line itself, that is a different mechanism and a different page. Hinges, latches, sagging gate frames, and a gate that has fallen out of alignment with its post are covered under Gate Repair, since a gate swings on hardware while a fence panel does not, and the fixes do not overlap much. If you are dealing with both a leaning fence section and a gate that will not latch, we can quote both in the same visit, but they are priced as separate lines.

If your fence is beyond patching, whether that is age, storm damage across most of the run, or a style change you want, new fence installation is a separate, bigger project with its own scope and materials conversation. We will tell you plainly during the assessment if repair is not the better use of your money.

How pricing works

Fence Repair is fixed pricing by repair type, since a single loose picket and a leaning run of posts are very different jobs:

• What’s wrong drives the price. Resetting one post is a smaller repair than repairing multiple posts along a run, and swapping a few pickets is different work than rebuilding a full panel that has come off its rails.
• Material changes the approach. Wood, vinyl, chain link, and aluminum each use different fasteners, repair techniques, and replacement parts, and matching an existing wood species or vinyl color affects both cost and lead time.
• How much of the fence is affected. A single failure point is priced differently than a run of several posts or panels showing the same problem, which is common after a storm or a hard winter.
• Access and post depth. A post reset that requires new concrete footing takes longer than one that can be re-braced in place, and fences along property lines with limited equipment access take more time to work around.

As general market context, not a Transit & Flow quote, HomeGuide’s 2026 cost data puts typical fence repair around $250 to $750 overall, with individual post replacement running about $120 to $400 and panel replacement about $150 to $400, depending on material and length. Starting at $299, itemized at booking based on scope.

Enter your project details and photos in the Estimate Builder for a preliminary online estimate. Final scope and price subject to verification on site.

What’s included

• An assessment of the full affected run, not just the single spot reported
• Post resetting or replacement, including new footing where the existing base has failed
• Panel, rail, and picket repair or replacement matched to existing material where available
• Replacement of rusted or stripped fasteners and hardware with exterior-rated parts
• Haul-away of removed material and debris from the work area
• Photos of below-grade post work you would not otherwise see
• All workmanship is backed by a 1-year labor warranty on labor, parts, and equipment covered per manufacturer terms.

What’s not included

• New fence installation or full fence replacement, quoted as a separate project
• Gate hinges, latches, and gate alignment, covered under Gate Repair
• Retaining walls or grading work adjacent to the fence line
• Staining or sealing beyond what is needed to complete the repair, unless added to the scope
• Property line surveys or disputes with neighbors over fence placement

Central Ohio context

Central Ohio’s clay-heavy soil is hard on fence posts. It expands when saturated and contracts when it dries, and every winter freeze-thaw cycle pushes moisture into the ground around a post footing, freezes, and heaves the post a little further out of plumb. That is the most common reason a fence that stood straight for years suddenly starts leaning: not one storm, but years of small ground movement finally reaching a tipping point.

A lot of the wood fencing around Dublin, Lewis Center, and New Albany went in during the 1990s and 2000s building boom, which puts a good share of Central Ohio’s fences at 20 to 30 years old. Original posts set in undersized footings, older fastener hardware, and pickets never re-sealed after the first few years are common findings on those fences today. The wood often still looks serviceable from the sidewalk while the posts holding it up have quietly failed underground, which is why we check post condition even when the visible complaint is a sagging panel.

Our process

1. Describe the problem online. What the fence is doing, where, and how long it has been going on, with photos, in the Estimate Builder for a preliminary online estimate.
2. Book online or call (614) 382-0000.
3. On-site assessment. We check the full affected run, including post condition below grade where relevant. Final scope and price subject to verification here.
4. Repair work. Posts are reset or replaced first, since a repaired panel on a failing post will not hold, followed by panel, rail, and picket repair.
5. Walkthrough. We test the repaired section by hand and review the work with you before we call the visit complete.

Services completed by appropriately qualified professionals where required.

Related services

Gate Repair | Handyman Service | Deck Board Repair

Ready to get a leaning post or damaged panel fixed properly? Build a preliminary online estimate in the Estimate Builder, book online, or call Transit & Flow at (614) 382-0000.