Gutter Replacement in Columbus, Ohio

Transit & Flow Group replaces failing gutters across Columbus and Central Ohio with seamless aluminum systems sized to your actual roof area, pitch, and downspout layout. Use our online Estimate Builder to enter your home’s rough dimensions and get a preliminary online estimate today, or book a measure visit and we will confirm the scope at your house.

Is this what you’re seeing?

Most Columbus homeowners call us about gutters after one of these moments:

• Water pouring over the front edge during a storm, even though the gutter looks clear. That usually means the gutter has pulled away from the fascia and lost its pitch, so water pools instead of moving to the downspout.
• Rust streaks or orange staining on older steel gutters, common on homes in Clintonville, Hilltop, and Whitehall that still have their original systems.
• Gutters sagging between hangers, often from years of wet leaf load under the maple and oak canopy that covers so many older Columbus streets.
• Peeling paint or soft wood on the fascia board behind the gutter. Water has been getting behind the system, and the gutter may be the least of it.
• A flooded flower bed or eroded trench directly under the roofline, which tells you the water is landing next to your foundation instead of being carried away from it.
• Seams that drip long after the rain stops. Sectional gutters rely on sealed joints, and those seals fail. Seamless replacement removes the joints entirely except at corners.

If two or more of these sound familiar, repair money is usually better spent on replacement. We will tell you honestly if a re-pitch and new hangers would solve it instead.

How pricing works

Gutter replacement is priced per linear foot, adjusted by a handful of factors. We do not quote one flat number for every house because no two rooflines are the same. Here is what moves the price:

• Total linear footage of gutter and downspout. A simple ranch needs far less material than a two-story four-square with multiple roof planes.
• Height and access. Second-story work and steep-pitch tie-ins take more time and staging.
• Material and size. Standard 5-inch aluminum costs less than 6-inch, and 6-inch is often the right call on larger roof planes that dump a lot of water into one run.
• Tear-off and disposal of the old system, including any rotted fascia we need to flag for repair before hanging new gutter.
• Downspout count and extensions, including underground drain connections if you want water carried farther from the foundation.

The Estimate Builder walks you through these inputs and produces a preliminary online estimate. Final scope and price subject to verification when we measure on site. We will never spring a surprise line item on you after the fact; anything that changes gets explained before work continues.

What’s included

• On-site measurement and pitch check of every run
• Removal and haul-away of the old gutters and downspouts
• Seamless aluminum gutter formed on site to continuous lengths
• Hidden hangers fastened into the fascia at consistent spacing
• New downspouts, elbows, and splash blocks or extensions
• Sealed corners and end caps
• Cleanup of the yard and beds, including a magnet sweep for fasteners
• All workmanship is backed by a 1-year labor warranty on labor, parts, and equipment covered per manufacturer terms.

What’s not included

• Fascia or soffit wood replacement (we can quote it as an add-on if we find rot)
• Roof repairs or shingle work at the drip edge
• Underground drain line excavation beyond standard extensions, unless added to the scope
• Gutter guards, unless bundled (see our Gutter Guards page)
• Painting of fascia or trim

Why gutters fail in Central Ohio

Central Ohio is hard on gutters in ways that milder climates are not. Our freeze-thaw cycles fill gutters with ice, and ice is heavy: a full run can hold well over a hundred pounds of frozen water, which is exactly how spike-and-ferrule fasteners work loose from the fascia. Then spring brings maple seeds and summer brings storm debris from the mature tree canopy in neighborhoods like Clintonville, Beechwold, and the Hilltop, where many homes from the 1950s to 1970s still carry undersized or original gutters.

Clay soil makes the stakes higher. Central Ohio’s dense clay drains slowly, so water that spills over a failed gutter sits against the foundation instead of soaking away. That is why gutter problems here so often show up later as damp basements. Newer builds in Dublin, New Albany, and Lewis Center are not immune either: builder-grade gutters are frequently 5-inch systems on roofs that shed enough water to justify 6-inch.

Our process

1. Build your estimate online. Enter your home’s rough footprint, stories, and downspout count in the Estimate Builder for a preliminary online estimate.
2. Schedule a measure visit. A technician measures every run, checks fascia condition, and confirms the scope. Final scope and price subject to verification here.
3. Approve the confirmed quote. You see footage, material size, downspout locations, and any fascia flags in writing before we order material.
4. Installation day. Most single-family replacements are completed in one day. We form the gutter on site so runs are seamless.
5. Walkthrough and water test. We check pitch with water where practical, review the work with you, and haul away the old system.

Permits and inspections may be required for some scopes; we will tell you if yours is one of them. Our crews are Bonded & Insured Professionals.

Related services

Gutter Guards | French Drain Installation | Deck Repair

New gutters protect your foundation, your siding, and your basement, and they should be sized to your roof instead of copied from the last house on the block. Start with the Estimate Builder for a preliminary online estimate, book a measure visit online, or call Transit & Flow at (614) 382-0000 and talk to a real person in Columbus.