Fascia Replacement in Columbus, Ohio

Transit & Flow Group installs full-run fascia replacement across Columbus and Central Ohio, covering one side of the house or the entire roofline. Fascia is the vertical board that runs along the roof edge, just above the gutters, capping the rafter ends and giving your gutters something solid to hang from. When that board has aged out or rotted along most of a run, replacing it as a system, rather than chasing individual soft spots, is usually the better investment. If your issue is one damaged section rather than a whole run, Fascia Repair is likely the smaller, more appropriate scope, and we will point you there if that is what the inspection shows.

Is this the right service for you?

Full fascia replacement usually makes more sense than repair when:

• Rot or damage runs across most of a side of the house, or the whole roofline, rather than being limited to a short section.
• Your gutters are sagging, pulling away from the house, or losing pitch in more than one area. Since gutters typically mount to the fascia board, widespread gutter movement is one of the clearest signs the fascia underneath has failed broadly, not just at one spot.
• The material is decades old and brittle, common on original wood fascia from the 1960s through 1980s that has never been replaced.
• Pest entry keeps recurring in different spots along the roofline. Squirrels, birds, and insects exploit weak or rotted fascia seams as an easy way into the attic, and repeated activity across a run usually points to broad material failure rather than one bad spot. We do not perform pest removal; if wildlife is currently inside, that is handled by a separately qualified pest control provider before or alongside our work.
• You want a lower-maintenance material, moving from painted wood to aluminum-capped fascia or an Aluminum Trim Wrap finish that holds up with less upkeep.
• A repair estimate for one section came back close to the cost of the whole run, which is common once you factor in decades of accumulated wear.

If the damage is confined to a few feet, or one gutter section pulling away in an otherwise sound run, repair is the more cost-effective choice, and we will recommend it instead of a larger project you don’t need.

How pricing works

Fascia replacement is priced as a range, built from the scope once we see your roofline:

• Linear footage of fascia to be replaced, depending on how many sides of the house are included.
• Material choice, from standard wood to aluminum-capped or composite fascia, each with different material and labor costs.
• Gutter coordination, since gutters typically mount to the fascia board and usually need to come down and go back up (or be replaced) as part of the project. This is scoped and priced alongside the fascia work.
• Access and height, since second-story runs and steep or complex rooflines take more time to stage safely.
• Condition of the rafter tails behind the old fascia, which isn’t always visible until the board comes off; any framing repair found is priced and shown to you before we proceed.

According to Angi’s 2026 cost data, homeowners nationally spend roughly $1,050 to $3,300 on fascia replacement, averaging around $2,500, with material and labor commonly running $7 to $22 per linear foot; this is general market context, not a Transit & Flow quote. Enter your project details and photos in the Estimate Builder for a preliminary online estimate. Final scope and price subject to verification on site.

What’s included

• A full inspection of the existing fascia, the rafter tails behind it, and the gutters mounted to it, with photos
• Removal and haul-away of the old fascia boards
• New fascia installed continuously across the agreed run, in your chosen material
• Re-hanging, re-pitching, or replacing the gutters that mount to the fascia as part of the same project
• Sealing at all seams and terminations
• Final cleanup and a magnet sweep for fasteners
• All workmanship is backed by a 1-year labor warranty on labor, parts, and equipment covered per manufacturer terms.

What’s not included

• Small, localized repairs better suited to Fascia Repair, which we will recommend instead if that is all your home needs
• Removal of an animal, nest, or infestation; that work requires a separately qualified pest control provider
• Soffit replacement, though it is very common to bundle the two since they sit next to each other; ask about combining scopes
• New gutter systems beyond what is needed to complete the fascia project; see Gutter Repair for gutter-specific work
• Roof shingle or decking work

Why Central Ohio fascia reaches end of life

Central Ohio’s freeze-thaw cycle is especially hard on fascia because the board sits exposed at the roof edge, catching ice damming in winter and full sun exposure in summer. Ice that backs up under shingles often finds the fascia first, and years of freezing and thawing can rot a board from the inside before the paint shows a problem. Mature tree cover in neighborhoods like Clintonville, Beechwold, and Upper Arlington adds to it, keeping the roofline damp longer and giving pests an easy route from overhanging branches to any weakened seam.

Housing age is the other major factor. A large share of Columbus-area homes built from the 1960s through the 1980s still carry original wood fascia, and builder-grade fascia from the 1990s and 2000s boom years in Dublin, Lewis Center, and New Albany is now old enough that gutters hung on it have begun to sag broadly rather than in just one spot. When gutters are pulling away in multiple areas along the same roofline, that pattern usually means the fascia itself is due for a full run rather than a patch.

Our process

1. Describe your roofline online. Rough footprint, number of sides needing work, and photos go into the Estimate Builder for a preliminary online estimate.
2. On-site inspection. We check the fascia, the rafter tails behind it, the soffit next to it, and every gutter mounted to it.
3. Written scope. Linear footage, material, gutter coordination, and price presented as a range before work starts. Final scope and price subject to verification here.
4. Installation. Old fascia removed, framing addressed if needed, new fascia installed continuously, gutters re-hung, re-pitched, or replaced as scoped.
5. Walkthrough. We review the completed work with you and confirm the gutters are properly supported along the full run.

Services completed by appropriately qualified professionals where required. Permits and inspections may be required depending on scope, and we confirm before starting.