Gate Repair in Columbus, Ohio

Transit & Flow Group repairs existing fence gates across Columbus and Central Ohio: sagging gates that scrape the ground, hinges that have worn out or pulled loose, latches that no longer catch, and frames that have racked out of square. A gate swings on hardware and carries its own weight cantilevered off a post, which is a different mechanism than a fence panel and fails in different ways. Tell us what the gate is doing, with photos, in the Estimate Builder for a preliminary online estimate.

Is this the right service for you?

Gate Repair covers the gate assembly itself: hinges, latches, the gate frame, and the post it hangs from. Common issues are a gate that sags and drags on one corner, hinges that have loosened or rusted through, a latch that no longer lines up or catches, and a gate frame that has racked diagonally out of square over years of swinging open and shut.

If the problem is elsewhere on the fence line rather than the gate itself, that is Fence Repair instead: leaning posts, broken pickets, or panels that have come off their rails away from the gate opening. The two mechanisms don’t overlap much, since a fence panel is a fixed structure and a gate is a moving one, but if you have both a dragging gate and a leaning fence post nearby, we can address both in the same visit as separate line items.

If your existing gate is damaged badly enough that hardware repair and re-squaring the frame won’t hold, or you want a different gate style or size, that moves into new gate or fence construction, which is a separate, larger project.

How pricing works

Gate Repair is fixed pricing by repair type, since a worn hinge and a fully racked frame are not the same job:

• What’s wrong drives the price. Replacing hinges or a latch is a smaller repair than re-squaring a racked frame or rebuilding a corner where the gate has pulled loose from its post.
• Gate weight and material. A wood picket gate, a heavier solid wood gate, vinyl, and metal gates each carry different loads on their hinges and require different hardware to fix properly, which changes the repair approach.
• Post condition. A gate that sags because its hinge post has shifted or loosened in the ground is a bigger repair than one where the post is solid and only the hardware has failed. We check the post as part of every gate assessment.
• Number of failure points. A gate with one loose hinge is priced differently than one with worn hinges, a broken latch, and a racked frame all at once, which is common on older gates that have never had hardware serviced.

As general market context, not a Transit & Flow quote, HomeGuide’s 2026 cost data shows typical gate repair running about $100 to $400, and Angi’s 2026 data cites a similar $150 to $400 range for professional gate repair, depending on what’s wrong and the gate’s material and size. Starting at $299, itemized at booking based on scope.

Enter your project details and photos in the Estimate Builder for a preliminary online estimate. Final scope and price subject to verification on site.

What’s included

• An assessment of hinges, latch, frame alignment, and the hinge post
• Hinge and latch hardware replacement rated for the gate’s weight and exterior exposure
• Re-squaring a racked gate frame, including bracing where needed to hold the fix
• Adjustment or reinforcement of the hinge post where it has loosened
• A swing-and-latch test of the repaired gate before the visit is complete
• Photos of hardware and post condition you would not otherwise see
• All workmanship is backed by a 1-year labor warranty on labor, parts, and equipment covered per manufacturer terms.

What’s not included

• New gate construction or full gate replacement, quoted as a separate project
• Fence panel, post, and picket repair away from the gate opening, covered under Fence Repair
• Automatic or electric gate openers and their controls
• Painting or refinishing beyond what is needed to complete the hardware and frame work
• Property line or ownership disputes involving the gate location

Central Ohio context

Gates take more abuse than the fence around them because they move, and every swing puts stress on the hinge post. Central Ohio’s clay soil compounds that: freeze-thaw cycling through the winter heaves and shifts the ground around a hinge post’s footing, and a post that starts even slightly out of plumb throws the whole gate out of square over time. That’s why a sagging gate is so often a post problem wearing a hardware disguise, and why we check the post before we just swap hinges.

Many of the wood gates in Dublin, Lewis Center, and New Albany date to the same 1990s and 2000s building boom as the fences they hang from, which puts a large share of them at 20 to 30 years of hinge wear and cycles of swelling and shrinking wood. Original hinge hardware from that era is often undersized for the gate’s current weight, especially if the gate has absorbed moisture over the years, and that mismatch is a common reason a gate that used to swing easily now drags or won’t latch.

Our process

1. Describe the problem online. What the gate is doing, whether it’s sagging, sticking, or not latching, with photos, in the Estimate Builder for a preliminary online estimate.
2. Book online or call (614) 382-0000.
3. On-site assessment. We check hinges, latch, frame square, and the hinge post together, since they are rarely independent problems. Final scope and price subject to verification here.
4. Repair work. Post and structural issues are addressed first, then hardware and frame alignment.
5. Swing test and walkthrough. We open, close, and latch the gate repeatedly before calling the visit complete, and review the work with you.

Services completed by appropriately qualified professionals where required.

Related services

Fence Repair | Handyman Service | Deck Railing Repair

Ready to get a sagging or sticking gate swinging and latching properly again? Build a preliminary online estimate in the Estimate Builder, book online, or call Transit & Flow at (614) 382-0000.