Visible Pipe Leak Repair in Columbus and Central Ohio

A drip under the sink, a wet joint on an exposed line, a corroded fitting you can see and touch. Visible pipe leak repair fixes the failed section and verifies the line is dry. Call (614) 382-0000, or build an estimate online.

Call (614) 382-0000 | Build My Estimate

Is this what you’re seeing?

• Dripping under a sink, vanity, or in the basement
• Green or white corrosion stains on a copper pipe or fitting
• Water beading or spraying at a joint or connection
• A puddle forming under the water heater
• A shutoff or supply valve that weeps when turned
• A pinhole spray on an exposed copper line

Honest pricing

A visible leak is diagnosed and priced on arrival, because the fix depends on what failed, a compression fitting, a soldered joint, a valve, or a length of pipe, and on the material and access. Our plumbing partner shows you the problem, explains the repair options, and gives you the price before any work begins. If the visible leak turns out to be a symptom of a larger line problem, we explain that and quote it as its own scope.

What’s included / what’s not included

Typically included:
– On-site diagnosis of the failed section
– Isolating and stopping the active leak
– Repair or replacement of the affected fitting, valve, or pipe section
– A leak-check under pressure to confirm the repair holds

Typically not included unless added to scope:
– Concealed leaks inside walls or slabs, which need investigation first
– Whole-line repiping when corrosion is widespread (quoted as its own project)
– Drywall, cabinetry, or flooring repair from prior water damage
– Permit fees where a repair requires one, which vary by municipality

What the repair looks like

For an accessible leak, the repair is usually straightforward: isolate the section, remove the failed fitting or pipe, and install a sound replacement using the right method for the material, soldered or press fittings on copper, proper transitions on galvanized or PEX. We then restore pressure and watch the repair to confirm it’s dry before we consider the job done. Where corrosion suggests the rest of the line is near failure, we tell you honestly rather than repairing one pinhole at a time.

Why Central Ohio homes call for this

Hard water is common across Central Ohio, and over years it drives pinhole corrosion in copper and scale buildup that stresses joints. Many area homes still have original copper or aging galvanized supply lines, and winter freeze-thaw cycles open small failures at fittings. A visible leak is often the first warning that a line is aging, which is why we assess the surrounding pipe, not just the drip in front of us.

Our process

1. Call (614) 382-0000 or build an estimate. Tell us where the leak is and what the pipe looks like.
2. Shut off if needed. If water is actively escaping, we’ll guide you to the nearest shutoff.
3. On-site diagnosis. We confirm the failed component and explain the repair and price.
4. Repair. We replace the failed section and pressure-check the line.
5. Honest guidance. If the surrounding pipe is at risk, we scope that separately so you can decide.

Related services

If you can’t see the source, start with leak detection or concealed pipe leak investigation. For an active burst or flooding, see emergency plumbing. Call (614) 382-0000 to schedule a repair.