Appliance Installation Consultation in Columbus and Central Ohio

Before you spend money on a new microwave, range hood, sink, faucet, or toilet, it helps to know for certain that it will actually fit and hook up correctly in your home. Transit & Flow Group offers an appliance installation consultation across Columbus and Central Ohio to confirm measurements, hookup compatibility, and code requirements before you buy, so you don’t end up with a return trip to the store or a mismatched purchase sitting in the garage. Build a preliminary online estimate for a consultation, or call (614) 382-0000 to talk through your project.

Is this what you’re seeing?

• You’re shopping for a new microwave, range hood, sink, faucet, or toilet and aren’t sure it will fit your space
• You don’t know whether your kitchen’s venting will support a ducted range hood or microwave, or only a recirculating one
• You’re unsure if your existing electrical outlet, water line, or drain will work with the model you’re considering
• You want to confirm a toilet’s rough-in dimension or a sink’s cutout size before ordering
• You’re renovating and want a second opinion before committing to a specific appliance or fixture online
• You’ve been burned before by a fixture that didn’t fit once it arrived, and you want it checked first this time
• You want to know what local code or permit requirements might apply before you buy

Honest pricing

This consultation is priced individually based on what you need checked and how many appliances or fixtures are involved. A quick single-item check, confirming a toilet’s rough-in dimension or a faucet’s hole pattern, is a smaller visit than a multi-appliance kitchen consultation covering venting, electrical, and plumbing hookups together. Where the consultation leads directly into an installation, we can often apply part of the consultation fee toward the job.

For general market context, HomeAdvisor’s 2026 data pegs typical appliance installation labor at $123 to $299 for straightforward jobs, with a broader range of $70 to $500 when structural changes or additional hookups are involved. That figure is general market data, not a Transit & Flow quote, and reflects installation costs generally rather than the cost of a stand-alone consultation. The full $249 fee is credited toward the cost of the work if you book it as a result of the visit.. Final scope and price subject to verification once our team reviews your space and the appliance you’re considering.

What’s included / what’s not included

Typically included:
– On-site or virtual review of the space where the appliance or fixture will go
– Measurement of the relevant opening, cutout, or rough-in dimension
– Assessment of existing hookups: water line, drain, electrical, and venting (ducted or recirculating) as relevant
– A plain-language rundown of what will and won’t work, and why
– Guidance on local code or permit considerations that could affect your choice
– A referral into the matching installation service once you’ve made your purchase

Typically not included unless added to scope:
– The appliance or fixture itself; Transit & Flow does not sell or supply appliances or fixtures
– Any installation work performed during the consultation visit
– Structural changes, such as cabinet modification or new venting runs, which are quoted separately as their own project
– Full remodeling design work; for a larger kitchen or bathroom project, our remodeling teams handle design consultations separately

Why this matters for Central Ohio households

Central Ohio’s mix of older housing stock and newer construction means hookups vary a lot from one house to the next. A cabinet opening in a 1920s German Village bungalow, a 1990s Dublin colonial, and a 2020s New Albany build were all sized to different standards, and what fits one won’t necessarily fit another. Recirculating-only venting is common in older kitchens that were never ducted to the outside, while rough-in dimensions on toilets and hole patterns on faucets have shifted over the decades too. Buying online based on a product photo alone is how a lot of Columbus homeowners end up with an appliance that’s an inch too wide, a faucet with the wrong number of holes, or a range hood with nowhere to vent. A short consultation before you buy catches these mismatches while they’re still easy and free to avoid, rather than after the box is already open.

Our process

1. Online estimate or call. Use the Estimate Builder or call (614) 382-0000 to describe what you’re considering buying and any product links or model numbers you have.
2. Consultation visit. Our team measures the relevant space, checks existing hookups, and reviews any code or permit considerations that apply.
3. Plain-language findings. You get a clear rundown of what will work, what won’t, and what to look for instead if needed.
4. Purchase with confidence. You buy the appliance or fixture knowing it will fit and hook up correctly.
5. Move into installation. When you’re ready, we schedule the matching Appliance and Fixture Installation service, whether that’s microwave, range hood, sink and faucet, or toilet installation.

Related services

Once you’ve confirmed your measurements and hookups and made your purchase, move straight into installation: over-the-range microwave installation, range hood installation, sink and faucet installation, or toilet installation. Ready to talk through your project before you buy? Build your estimate or call Transit & Flow at (614) 382-0000.