Vinyl Sheet Flooring in Columbus and Central Ohio

Transit & Flow Group installs vinyl sheet flooring for Columbus-area homeowners who need one thing above all else: a completely seamless, waterproof surface. Unlike our Luxury Vinyl Plank Flooring service, which uses individual rigid planks installed piece by piece, vinyl sheet flooring comes in large rolls that are cut to fit a room and installed with few or no seams at all, which is exactly why it shows up so often in bathrooms, laundry rooms, and rental units. Build a preliminary online estimate in the Estimate Builder, or call (614) 382-0000 to talk through your space.

Is this the right service for you?

• A bathroom, laundry room, or mudroom where water sits on the floor regularly and seams are a liability
• A rental property or investment unit that needs a durable, low-maintenance floor at a lower material cost than plank products
• A basement or utility room where budget matters more than a wood-look aesthetic
• Replacing worn or curling old sheet vinyl, or cracked linoleum, with a modern seamless product
• Comparing vinyl sheet flooring to Luxury Vinyl Plank Flooring and unsure which fits your room
• Still deciding on flooring material across several rooms, in which case our Flooring Selection design consultation is the better starting point before you commit to a specific product

How pricing works

Vinyl sheet flooring is scope-based, range pricing, built around a few factors:

• Room size and roll width. Sheet vinyl typically comes in wide rolls (commonly 6 or 12 feet), so smaller rooms often install with zero seams, which keeps both material waste and labor lower than plank products.
• Subfloor condition. A flat, sound subfloor is the cheapest scenario. Old adhesive, uneven plywood, or a subfloor that needs patching before a smooth sheet product can be laid adds cost and time.
• Removal of existing flooring. Pulling old vinyl, linoleum, or tile is priced separately, and older adhesives sometimes require extra prep to get a flat surface underneath.
• Product tier. Sheet vinyl ranges from basic economy rolls to heavier commercial-grade wear layers, and the tier you choose changes both material cost and expected lifespan.

As general market context, not a Transit & Flow quote, Angi’s 2025 flooring cost data puts sheet vinyl installation in the range of roughly $2 to $7 per square foot installed, depending on product grade and subfloor prep. Enter your project details and photos in the Estimate Builder for a preliminary online estimate. Final scope and price subject to verification on site.

What’s included

• Removal of existing flooring where applicable
• Subfloor inspection and minor prep or patching
• Full-room measurement and seam planning to minimize visible joints
• Installation of the vinyl sheet product, including trimming at cabinets, tubs, and doorways
• Transition strips or thresholds where the new floor meets another material
• All workmanship is backed by a 1-year labor warranty on labor, parts, and equipment covered per manufacturer terms.

What’s not included

• Major subfloor repair or replacement, such as rotted plywood under a bathroom
• Plumbing or fixture work, including toilet removal and reset, unless added to scope
• New baseboards or trim beyond reinstalling existing pieces
• Moisture mitigation for an active water intrusion problem, which is addressed separately before flooring goes down

Vinyl sheet flooring in Central Ohio homes

Central Ohio’s older housing stock, think Clintonville, Grandview, and the original neighborhoods of Worthington and Bexley, often still has original tile or linoleum bathrooms and laundry areas that have outlived their finish. Vinyl sheet flooring is a common, budget-conscious replacement in exactly these rooms, because a seamless product handles splashing, spills, and the humidity swings of a small bathroom without the grout lines that trap moisture in old tile. It’s also a frequent choice in the region’s rental market, from student housing near the OSU campus to investment properties in Whitehall and Reynoldsburg, where durability and a lower material cost matter more than a premium wood-look finish.

Choosing between vinyl sheet and Luxury Vinyl Plank Flooring usually comes down to what the room needs. If you want the visual warmth of a wood-look floor in a kitchen or main living space, LVP’s individual planks are the better fit. If you want the most water-resistant, budget-friendly option for a small wet room, or you’re flooring a rental where seams and long-term maintenance costs matter more than aesthetics, vinyl sheet is typically the more practical call.

Our process

1. Describe your space online. Room dimensions, current flooring, and photos go into the Estimate Builder for a preliminary online estimate.
2. On-site measurement. Our team confirms exact dimensions and checks subfloor condition before finalizing seam placement.
3. Product selection. You choose the sheet vinyl pattern, color, and grade that fits the room and your budget.
4. Installation. We remove old flooring if needed, prep the subfloor, and install the new sheet with trimmed edges and reinstalled transitions.
5. Walkthrough. We check seams, edges, and transitions with you before calling the job complete.

Services completed by appropriately qualified professionals where required.