Tile Flooring in Columbus and Central Ohio

Transit & Flow Group installs ceramic, porcelain, and natural stone tile flooring for Columbus-area homeowners across kitchens, bathrooms, entryways, and main living spaces. Tile is prized for its durability and design range, from classic subway patterns to large-format porcelain that mimics wood or stone. Build a preliminary online estimate in the Estimate Builder, or call (614) 382-0000 to talk through your rooms, pattern, and material options.

Is this the right service for you?

• Wanting a durable, design-forward floor for a kitchen, bathroom, entryway, or mudroom
• Replacing cracked or dated tile, or worn vinyl and laminate, with ceramic, porcelain, or natural stone
• Planning a patterned layout, such as herringbone, basketweave, or a large-format plank tile
• Wanting a floor that stands up to daily wear in high-traffic entry areas and mudrooms
• Comparing tile to other wet-area flooring; if water performance in a specific problem area is your main concern, our Waterproof Flooring page is the umbrella service to start from
• Still deciding on pattern, grout color, or which rooms should get tile versus another material, in which case our Flooring Selection design consultation is the better starting point

How pricing works

Tile flooring is scope-based, range pricing, built around a few factors:

• Square footage and layout. Straightforward rooms install faster than layouts with lots of cuts, corners, or a diagonal or patterned layout.
• Tile material. Ceramic, porcelain, and natural stone (like travertine, slate, or marble) vary widely in material cost, with natural stone generally the most expensive and requiring sealing.
• Subfloor prep. Tile needs a flat, rigid substrate, so cement backer board or self-leveling underlayment is common prep work, especially over older wood subfloors.
• Pattern complexity. A straight grid lay is the most efficient; herringbone, basketweave, and large-format tile with tight tolerances all add labor time.
• Removal of existing flooring. Pulling old tile, vinyl, or laminate is priced separately, and removing old tile is often the most labor-intensive part of a tile replacement.

As general market context, not a Transit & Flow quote, HomeGuide’s 2025 flooring cost data puts ceramic and porcelain tile installation in the range of roughly $5 to $15 per square foot installed, with natural stone often running higher depending on the material and pattern. Enter your project details and photos in the Estimate Builder for a preliminary online estimate. Final scope and price subject to verification on site.

What’s included

• Removal of existing flooring where applicable
• Subfloor prep, including cement backer board or leveling as needed
• Layout planning for pattern, grout lines, and transitions
• Installation of the tile, including cutting around cabinets, fixtures, and doorways
• Grouting and sealing appropriate to the tile material chosen
• All workmanship is backed by a 1-year labor warranty on labor, parts, and equipment covered per manufacturer terms.

What’s not included

• Major subfloor repair or structural leveling, quoted separately if discovered
• Plumbing or fixture work, including toilet removal and reset, unless added to scope
• Waterproofing membranes for a shower or wet-area assembly, quoted as part of that specific scope
• New baseboards or trim beyond reinstalling existing pieces

Tile flooring in Central Ohio homes

Central Ohio’s mix of harsh winters and humid summers brings a lot of moisture, salt, and grit into entryways and mudrooms for months at a time, which is exactly the kind of high-traffic, wet-and-dirty use case tile handles well. Homeowners across Upper Arlington, Worthington, and Grandview commonly choose porcelain tile for entryways and mudrooms for that reason, while kitchens throughout the region increasingly use large-format porcelain that reads like natural stone or wood without the maintenance either material actually requires. In bathrooms, tile remains the traditional standard, though grout lines do need periodic sealing to keep performing well in a wet environment over time.

If a specific wet area, like a bathroom or basement, is your main concern and you’re not sure whether tile, vinyl sheet, or Luxury Vinyl Plank Flooring is the right call, our Waterproof Flooring page walks through those tradeoffs by room and use case. And if you’re still narrowing down pattern, grout color, or which material fits which room, our Flooring Selection design consultation compares tile against hardwood, engineered wood, luxury vinyl plank, and carpet side by side before you order anything.

Our process

1. Describe your space online. Room dimensions, current flooring, and photos go into the Estimate Builder for a preliminary online estimate.
2. On-site measurement. Our team confirms dimensions and checks subfloor condition and flatness.
3. Material and pattern selection. You choose the tile material, size, and layout pattern that fits your space and budget.
4. Installation. We remove old flooring if needed, prep the subfloor, and install the tile with your chosen pattern and grout.
5. Walkthrough. We review grout care and sealing instructions and confirm the finished floor meets expectations.

Services completed by appropriately qualified professionals where required.